You’ve probably noticed that the front of your Ford F-150, or any truck for that matter, sits somewhat lower than the back. Because trucks are designed to carry huge loads, the increased height in the back prevents sagging when additional weight is added. So, What Size Leveling Kit Do I Need For F150?
You may raise the front of your Ford F-150 a few inches with a Leveling Kit to correspond (or make it “level”) with the back. You can increase the distance between the rear axle and the frame by elevating the back of your truck. This will reduce the risk of damage to your suspension parts from the additional stress of bottoming out under large loads.

Table of Contents
- What Is Leveling Kits?
- Frequently Asked Questions
- How can I determine the size of the leveling kit I require?
- For a 2019 Ford F150, what size leveling kit do I need?
- Is a 2.5-inch leveling kit going to affect my truck?
- How much does a leveling kit contribute in terms of inches?
- Will 35-inch tires fit on a leveling kit-equipped 2019 F150?
- Will 33-inch tires fit on a leveling kit-equipped F150?
- With a leveling kit, what size tires can I fit?
- Is it possible to put 35-inch tires on a factory F150?
What Is Leveling Kits?
Leveling Kits are obviously useful, even if they aren’t strictly necessary. Installing a leveling kit on your Ford F-150 will assist minimize or eliminate rake while also allowing you to fix larger tires. Additionally, you will benefit from increased ground clearance. The cargo capacity of your vehicle will not be affected because it only affects the front.
Furthermore, because F150 Leveling Kit have fewer parts, they are substantially less expensive than lift kits. Overall, leveling kits are a modest and cost-effective method to make your F-150 Truck look more aggressive and stand a little taller without having to replace multiple pieces.
Many trucks have an ugly and unpleasant tilt in their suspension when they leave the factory. You’ve come to the right site if you’re one of the many people who want to remedy this. Today’s tutorial will assist you in selecting the F150 Leveling Kit vehicles so you can finally improve the appearance of your truck.
Installing a leveling kit is a reasonably simple job for someone who knows their way around a truck, so this is usually something you can handle at home with a set of jacks and a basic tool box. Those who are unsure about their mechanical talents might take their truck to a shop like Ultimate Rides for installation.
Coil spacers, strut extensions, or torsion keys are used in leveling systems, and they all rely on your truck’s suspension. Furthermore, many of these kids can be installed without the need for jacks to raise your truck. To accommodate the extra lift, coil spring spacers are added to the top or bottom of your spring buckets, and depending on the height of your package, some may require shock extensions and bump stop relocation.
All you have to do with strut extensions is insert them on top or bottom of your existing struts. They’re commonly found in vehicles with front coil over struts. Torsion key kits, which are used on torsion bar suspension systems, are more complicated because they replace the OE parts rather than merely adding to them. These OEM replacement kits assist in raising the height of your Ford F-150 and are more durable than the factory ones because they are designed to accommodate the additional lift.
Conclusion
When looking for the finest Leveling Kit For F150 Trucks and determining What Size Leveling Kit Do I Need For F150? there are a few variables to consider. Measure your vehicle’s present suspension in the front and back before looking at kits. If you have uneven suspension, this will tell you how much of a lift you’ll need on each end. You can start looking for kits now that you know exactly what you need.
Brand sure you get a leveling kit that fits your truck exactly, including the make, model, year, and configuration (2WD or 4WD). After you’ve whittled down your options, it’s time to start comparing brands. You want to seek for brands that have a lot of positive feedback from customers. That is always a good indicator of whether or not a product will be useful to you. Also, pay attention to the materials used, as some are significantly more durable than others.
Frequently Asked Questions
How can I determine the size of the leveling kit I require?
The distance between the wheel’s center and the top of the wheel well should be measured. This should be done for both the front and back of your car. The rake, or the difference in height between the front and back, is calculated by multiplying the two figures together.
For a 2019 Ford F150, what size leveling kit do I need?
To get a flat, no-rake, dead-level stance on a Ford F150, a 2.5″ leveling kit is required.
Is a 2.5-inch leveling kit going to affect my truck?
A properly installed quality leveling kit will not harm your truck. A leveling kit can also come in handy if you plan on going off-roading or utilizing a snow ploughs.
How much does a leveling kit contribute in terms of inches?
A leveling kit consists of hardware that raises the vehicle’s front end to match the stock height in the back. A leveling kit is often meant to boost the front end of the vehicle up to 2 inches.
Will 35-inch tires fit on a leveling kit-equipped 2019 F150?
Unless you use a rim with a lot of offset, you’ll rub. The breadth will be a problem for you. The level will suit up to 35s, whether it is 2 or 2.5 inches. I’d go with the 2″ level because it puts less strain on your suspension.
Will 33-inch tires fit on a leveling kit-equipped F150?
To put 33” tires on your F-150, you don’t need to do much. A Leveling kit is a wonderful alternative because it is both affordable and functional, and it will provide you the clearance you need to use larger tires than stock.
With a leveling kit, what size tires can I fit?
Most trucks can accommodate up to 33″ tires without requiring a lift. Other changes, such as torsion key adjustments, wheel spacers, fender cutting, and leveling kits, may be necessary depending on your truck and tyre combination.
Is it possible to put 35-inch tires on a factory F150?
To run 3512.5 tires, you’ll need at least 4 inches of clearance, as well as a 9-inch wide rim with close to zero offset. The wider the rims, such as 12 wide rims, the more of a lift you’ll need because the offset will be roughly -44, pushing the tires out a lot.
Hi, I am Muhammad Daim – an automotive lover and researcher. I am a co-founder at AutomotiveGuider.com. I have a Bachelor’s Degree in Computer Science but cars and trucks have always been my passion. My goal is to always learn new skills and share my experience with the world.