How To Change Spark Plugs Mitsubishi Eclipse?

This blog post will provide you with a step by step guide for How To Change Spark Plugs Mitsubishi Eclipse? We also cover the tools and materials that are needed, how to access the pins and how long it should take. If you follow these steps, there is no way that you won’t be able to change them yourself!

Change Spark Plugs Mitsubishi Eclipse

Tools And Materials

  • Following are the Tools And Materials:
  • A 10mm socket wrench
  • A ratcheting socket wrench
  • 10mm spark plug gap tool
  • 3/8″ extension for ratcheting socket wrench, if needed. If the gap is between 0.035″-0.040″ use a 25mm gap tool, if it’s between 0.042″-0.050″ use a 30mm gap tool, if it’s between 0.051″-0.060″ use a 35mm gap tool, if it’s over 0.060″ use the gap tool that matches the gap size
  • Pink rubber gloves or similar to keep yourself from getting dirty
  • New spark plugs for your vehicle

Time Required

  • Changing one spark plug should take approximately 15 minutes, but if you are changing eight plugs, it can easily take an hour.
  • It is good to have a clean workspace and wear gloves so that your hands don’t get dirty or greasy.
  • A vice may come in handy for this project as well, depending on the tools you decide to use.
  • One spark plug should take approximately 15 minutes, but if you are changing eight plugs, it can easily take an hour.
  • A clean workspace and gloves to keep your hands from getting dirty or greasy will make this project much more effortless.
  • A vice may also come in handy depending on the tools you choose to use.
  • One spark plug should take approximately 15 minutes, but if you are changing eight plugs, it can easily take an hour. A clean workspace and gloves to keep your hands from getting dirty or greasy will make this project much easier. A vice may also come in handy depending on the tools you choose to use.

Can I Change My Spark Plugs Myself?

Yes. There are two types of spark plugs, platinum, and copper. If the spark plug is a copper type, it will be soldered to a copper-colored porcelain insulator and a rubber or cork gasket beneath the washer. Proper tightening the top mounting screw with pliers completes this “bridge.”

The platinum type is already heavy-duty from factory set-up, but if they have been tampered with, you will find that their end where the connecting wire attaches has been cut off at an angle cleanly.

Which looks like beveled glass or diamond-shaped shard on both ends! Replacing these plugs on any engine should never interfere with transmission shifting so long as full torque is applied on installation and removal.

A Step By Step Guide For Replacing The Plugs Yourself

Steps: Accessing the Spark Plugs To access each of these spark plugs, start under the hood near where all four tires meet up with one another at a corner of your vehicle’s engine bay which has been marked “Do Not Link Here” please refer to picture #12 for reference location.

First Step

The First Step is to loosen the screws that are holding down the plastic cover on top of your engine. You can do this with a Phillips screwdriver, but be careful not to strip them!

Second Step

You will have to remove the wiring harnesses from behind each plug.

Third Step

Pull out all eight spark plugs and set them aside safely, so they don’t roll off any countertops or drop onto dirty garages. Before putting new ones in, use some anti-seize grease instead of oil because it will create less friction when making contact between electrodes later on. Newer models might already come pre-greased, which means you won’t have to worry about this step.

Fourth Step

Finally, screw the new plugs in by hand as much as you can. After this is done, use a torque wrench to tighten them down to 30 foot-pounds or 44 Newton meters.

Conclusion

If you’re trying to change your spark plugs and need an extra hand, we recommend that you ask a friend or family member for help. You may also want to take pictures of the process as it’s happening so that someone can give you directions via phone if they don’t have time to come over in person.

Hopefully, these tips will make changing your car’s spark plugs easier going forward! This article about How To Change Spark Plugs Mitsubishi Eclipse? Covers all aspects of your query.

Frequently Asked Questions

Is the 2003 Mitsubishi Eclipse equipped with spark plugs?

The spark plugs are found underneath the air filter. It is best to check your owner’s manual for this information.

What happens if you don’t change your spark plugs?

If you don’t change your spark plugs, your engine won’t be working as efficiently as it could. You’ll notice a lack of power and an increase in fuel consumption, and that will be costly later on if you wouldn’t do it on time.

What are the symptoms of bad spark plugs?

The symptoms of bad spark plugs are different for each car. The answer to your question will vary depending on where you live, what kind of vehicle you have, and how old it is. A few examples are lower gas mileage, irregular idle speed, low power at higher RPMs.

Leave a Comment